 |
|
Injection Moulding Machines Lab Model (SVI-12) |
|
 |
|
 Technical Data
|
|
| Specification M/C Model Injection Unit |
Unit |
NP 20 / 40 |
| Screw Diameter MM 25.4 |
MM |
25.4 |
| Injection Pressure |
KG/SQ CM |
1058 |
| Injection Stroke |
MM |
115 |
| Max Shot Weight(PS) |
GMS |
52 |
| Screw L/D Ratio |
- |
16 |
| Screw Revoltion |
RPM |
0-240 |
| Locating Ring Dia |
MM |
75 |
| Nozzle Contact Force |
Tonnes |
2.25 |
| No of Heating Zones |
NOS |
3 |
| Nozzle Tip Radius |
MM |
17.5 |
|
|
Clamping Unit |
|
| Toggle |
- |
Hor |
| Clamping Force |
Tones |
20 |
| Dis. Bet Tiebar |
MM |
190x190 |
| Die Plate Size (WxH) |
MM |
315x315 |
| Max./Min. Mould Thick |
MM |
205/100 |
| Clamping Stroke |
MM |
130 |
| Max Daylight |
MM |
335 |
| Locating Ring Dia |
MM |
75 |
| Nozzle Contact Force |
Tonnes |
2.25 |
| No of Heating Zones |
NOS |
3 |
| Nozzle Tip Radius |
MM |
17.5 |
|
|
Electricals |
|
| Pump Motor Power |
KW |
3.75 |
| Heating Load |
KW |
2.2 |
| Total Connected Load |
KW |
5.95 |
|
|
General |
|
| Oil Tank Capacity |
LTR |
100 |
| Over All Dim. (LHB) APPX |
MTR |
3.5 x 1.27x 0.61 |
| Machine Weight (Apprx) |
Tonnes |
1.5 |
|
