 |
|
| Chem Make Lab Fitting |
Emergency Safety Shower &
Eye Wash Shower Fitting |
|
| Panel Mounted Fume
Hood Valve |
Panel Mounted Fume
Hood Valve |
Bench Mounted
Single Way Valve |
 |
 |
 |
|
| Bench Mounted Two Way Valve |
Bench Mounted Hot & Cold Mixture Valve |
Bench Mounted Single Way Swan Neck Valve |
 |
 |
 |
|
| Fume Hood Outlet Nozzel
For Gas |
Bench Mounted Four Way Valve |
Bench Mounted Three Way Swan Neck Valve |
 |
 |
 |
|
| |
Fume Hood Outlet Nozzel
For Water |
|
| |
 |
|
|
|
 Technical Specification
|
|
| Dry services valves for water, Oxygen and technical gases (99% clean) can be used where a higher degree of cleanliness is required. The design and manufacturing are adapted to Oxygen services meaning that presence of mineral oils and gases are minimized. The fitting surface treated with P.U. METAL COAT. which is highly resistant to most chemicals, UV fading and heat. Innovative Lab fitting are made of FORGE BRASS CASTING. typical media for this range are oxygen, water and all non-burning, non-corrsive and non-toxic 4.0 gases such as N2 and he. Innovative lab fitting are designed for R&D, morden laboratory use. Every fitting is leak tested before leaving our factory. |
|
General Standard |
|
The laboratory fitting we produce are manufactured according to the following specific standard :
DIN 12920
Color code for fluids on operating devices of laboratory taps.
DIN 12898
laboratory taps: outlet nozzles.
DIN 12919
laboratory taps, connecting sleeves: tap columns, heights and flang dimensions.
DIN 3537
Gas valves (LESS THAN OR EQUAL) PN 4 Requirments and test for approval of laboratory valves. |
|
Material with Service Contact |
|
MOC of valve body : Brass Forging
MOC of Spindle : Brass Rod
Knob : Nylon
Spindle Oring : Neoprene
Suitable for Services like water, Gas, & Vacuum
Testing pressure : 15 Bar / 220 PSI.
Maximum working pressure : 10 Bar / 147 PSI |
